Check valve swing check wafer type to be installed between flanges ANSI 300, short body, tilting disc type, 650 PSI, flanges ANSI 300 Body made of stainless steel CF8 Seat on the body, disc, bolt and nuts and shaft made of stainless steel 304SS, Metal seal 20", 32"
PN10 Plug valve DN300/DN350 Body and Bonnet: UB6 (904L stainless Steel) Plug: UB6 (904L stainless Steel ) Stem: UB6 (904L stainless Steel) Seat: PTFE Gasket kit: PTFE Bolts and Nuts: stainless steel 316 L Lever: ductile Iron End Connection with flanges Face to face: 356 mm Working Temperature: 60°C Fluid: Phosphoric Acid 29% and 54 [...]
FORGED DISC WAFER CHECK VALVE DUAL PLATE CHECK VALVE DESIGN STANDAD API 594 SOLID FULLY LUGGED FLANGED END ANSI B16.5 RTJ, RETAINERLESS DESIGN, BODY ASTM LCB DISC F316 TRIM SS316 SPRING X750 DN 18" CL. 600# RTJ
DN1000 Stainless steel wafer butterfly valve Type of valve: Butterfly valve Design: Triple eccentric Diameter DN,(mm):1000 Nominal pressure, (Mpa): 1.6 Type of connections: Wafer Body material: Stainless steel CF8 Disc material: Stainless steel CF8 Stem material: F304SS Type of seal: Combined. Stainless steel and graphite
Forged body triple offset butterfly valve, Bidirectional seal, BW end type, fully metal to metal type, body: A105, disc: A351 CF8, stem: 17-4PH, , body inserted seat : STL, sealing ring on disc：STL,PN25 DN1400
CHECK VALVE PISTION CHECK W/SPRING 1.5" ISO 15761/API602 AND MFR'S STD INTEGRAL FLG 600LB RF 125 Ra BODY A105 TRIM 13CR
DN150 triple offset butterfly valve Triple offset butterfly, Flange norm: flanged ends RF, ANSI 6” 150#, body WCB, disc: CF8, shaft:420ss, seat: STL, sealing: 304ss+graphite, bare stem .
TRIPLE OFFSET BUTTERFLY VALVES QUARTER TURN METAL SEATED TRIPLE ECCENTRIC QTV SERIES,SERVICE PRESSURE 1 BAR LUG TYPE RTJ ANSI 600# BARE SHAFT BODY: ASTM A352 LCC DISC: ASTM A352 LCC SEAT ON BODY: STELLITE GR.21 LAMELLAR RING: AISI 316 + GRAPHITE RETAINING RING: AISI 316 SHAFT: 17-4PH PACKING: GRAPHITE 10" 24"
T-TYPE STRAINER, STRAIGHT-THROUGH, SCH120, BW,MATERIAL: ASTM A234 WPB BLAIND FLANGE MAT. : A105 WELDING NECK FLANGE MAT. :A105 BASKET SCREEN AND SUPPORT GUID ROD MAT. : 304 SS SCREEN, Screen: Perforated Plate 3mm and For Pre-Commissioning: Mesh 40 and Perforated Plate 6mm, According to the attached drawings (Rev. 3), GASKET: RTJ-OCTOGONAL RING JOINT (SOFT IRON, [...]
